Friday, December 23, 2011

Forms for Foundation Going Up at Last

Sunup on December 21, 2011 and the guys have already put out the batten boards for the perimeter of the house.


Notice the generator by the tree.  No electricity yet so they had to bring their own power.


Not much talking going on - real professionals who knew what they were doing.


They used the transome and the plans which can be seen laying on the soppy ground.  Much rain the night before but it didn't slow them down.


First actual edge of foundation is now visible.


Once the outer perimeters were obvious, it was also obvious we needed to take out a couple more trees.  Good ole Jose happened to be on the place taking out Cedars so he pushed over and carried out the oak and elm trees.  Looked easy but in 5 minutes the trees were gone and the ground was smooth.  Aren't machines and terrific operators wonderful!





Now they are getting close with the edges and supports.  It was interesting to watch the process they have of putting in the supports.


This was clearly the head man and he continually checked back with the slab plan laying on the ground near him.


This shows the process of putting in a stake at the corner of the string corner and checking level, 


He kept adjusting until it was true on all sides.


Out comes the 16 lb sledge and forces the 2x4 into the rocks and earth.  Wasn't easy since many times the rock was hard to get through but in spite of that the stakes were put exactly where they were required and without a drill...just brute strength.  The Super said the wet ground actually helped them move or break the rocks.


Then he nailed the side of the form to the stake.


One guy seemed confused with the plans but  here comes the boss..


After a committee meeting, with the boss telling them how to read the plans, they were back to work.


They moved the string with the help of the transome to whatever edge of the wall the were currently framing.


Side wall with many supports and notice the size of the rocks that were moved out of the way.


  Dennis and I checked the measurements for accuracy and they were within 1/4 of an inch on all the outside edges and also on the cross checks we did for square----just amazing! 
All the forms were complete with the area cleaned of debris and waiting for the fill.

And HERE IT COMES!



They brought in about 20 loads and only one truck got stopped by TDOT.  I didn't ask him if he got a ticket but I think almost all of them didn't speak any English.


There was lots of traffic on the site.  There was even a truck that brought in the portable john.  The construction road received some good compaction.  Good thing because it rained and rained that night.

This is how the site looked the next morning.  The slab guys had taken the precaution to put plastic on the fill to try to keep it dry.  If you look closely the beam trenches around the outside of the foundation had also been dug.


Worked pretty good where it was covered but right at the front I sunk in to my ankles.


Just as I was attempting to get out of the mud, my nephew, David, showed up to see how the construction was going.  He brought a friend.  The 7-point buck could have been a twin to the one I have seen several times on my place.  But his deer was shot in the Hill Country.


We hoped to start the plumbing rough-in the next morning but the site just did not dry up enough.  So we are delayed until next Tuesday after Christmas.

MERRY CHRISTMAS TO ALL...AND HOPING TO GET THE SLAB POURED THIS YEAR.

No comments:

Post a Comment